New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Houston pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Windows & Doors in Houston, TX | Meridian Windows and Doors Houston
We provide independent CWS window and door service across Houston, from single-pane aluminum retrofits in the Heights to impact-rated sliders near Clear Lake. The difference here comes down to one thing: Houston’s humidity and unzoned building history have produced CWS failure patterns you won’t find in Dallas or Austin. Call (432) 278-2282 for a free estimate, and we’ll tell you straight whether your CWS unit needs a part, a sash, or our Window Replacement in Houston.
Meridian Windows and Doors Houston is not a CWS factory outlet and we don’t claim factory authorization. We’re field installers and repair techs who know how these windows behave after fifteen or twenty Houston summers. That’s the expertise that matters when a horizontal roller won’t budge or a casement crank snaps during a squall. For a deeper look at the brand, visit our CWS sales & service page.
Why Houston Residents Choose Us for CWS Service
CWS frames run through older Houston homes in patterns you can map by decade. 1980s brick veneer tracts got the 4000 Series horizontal rollers. Custom builds near the Galleria got Architectural Casements. The Heights bungalows? A mix of whatever the original remodel spec’d, which is why we stock balances and roller carriages for half a dozen CWS line generations instead of guessing.
Elliot Vance, our owner, learned the trade at Los Angeles Trade-Technical College and has spent the better part of two decades doing window and door work across the country before bringing that experience to Houston. He reviews every estimate personally. Our techs are background-checked and uniformed, so you know exactly who’s walking through your door. The price goes on paper before any work starts, and it doesn’t move at the door. If the repair fails within 365 days, we come back at no charge. That’s the Done Right Promise, written on every job.
Common CWS Windows & Doors Problems We Solve in Houston
- Corroded single-hung channels on CWS 3000 Series frames. Original aluminum frames collect condensation along the sill, and Houston’s humidity turns that into channel corrosion within a few seasons. The sash starts binding, then sticking, then won’t lift at all. We clean and re-line channels where the frame is sound, and tell you honestly when it’s time to replace the sash.
- Worn wool pile weatherstripping on early CWS 4000 horizontal rollers. The factory wool pile breaks down in Houston heat and humidity, which lets moist air pass and leaves condensation streaks or rust marks on interior drywall. We replace the weatherstripping with stainless wool pile that holds up far longer than the original material.
- Bowed interlocks on CWS 3-panel sliders. In Clear Lake and bayou-adjacent neighborhoods, storm cycles flex the frames just enough that the center rail interlock bows and the panels stop sealing. You feel the draft before you see the gap. We can often straighten and re-adjust the interlock, but after multiple storm cycles, panel replacement is the honest fix.
- Stripped crank gears and snapped torque bars on CWS casements. Houston humidity isn’t kind to casement hardware. Gear teeth strip, torque bars snap, and the sash flaps loose during squalls. We replace the operator assembly with OEM parts where CWS still supplies them, and use proven aftermarket equivalents when the line’s discontinued.
- Fogged sealed glazing units. Once the seal on an insulated glass unit fails, Houston’s humidity works into the airspace and you get permanent fog that no amount of defogging fixes. We replace the sash or the full unit, depending on the frame condition and what the warranty situation looks like.
CWS Service in Houston: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a national CWS page. Houston’s unzoned, boom-and-bust growth left thousands of 1980s brick veneer tract homes with CWS 4000 horizontal rollers sized 60×36, which was the standard bedroom slider spec at the time. But Houston’s 36-inch egress rule means you cannot replace a bedroom slider with a single-hung unit without widening the rough opening. That’s a permit complication, and it changes the math on what “simple replacement” costs. Neighboring suburbs with different codes don’t face the same constraint. When we quote a CWS bedroom window in a Houston home built during that era, we calculate the egress path first. If the rough opening needs to grow from 36 to 48 inches, we tell you before the estimate, not after the drywall comes out. Measure twice, seal it right, and the window does the rest of the talking.
CWS Models & Products We Service in Houston
We repair and replace the CWS lines most common in Houston housing stock: the 3000 Series Single-Hung, the 4000 Series Horizontal Roller, the 6000 Series Impact Sliding Door, and the Architectural Casement. When CWS still supplies OEM parts – balances, rollers, multi-point locks, weatherstripping – we source them. When a line’s been discontinued, we use aftermarket equivalents that have held up in Houston conditions on jobs we’ve completed. For failed sealed glazing units or frames with heavy corrosion, we’ll recommend sash replacement or Houston Window Installation for a full-frame upgrade rather than patching something that will fail again in eighteen months. We carry a working inventory of common CWS parts locally so Houston service calls don’t wait on a parts truck from out of state.
CWS Service Pricing in Houston
Most CWS service calls in Houston run between $150 and $450 for a repair like a roller replacement, weatherstripping job, or crank operator swap. Sash replacements, depending on the model and glass spec, typically land between $400 and $900 per unit. Full-frame CWS replacements start around $900 per opening and climb based on impact rating requirements and rough opening work. Those are honest ranges, not teaser numbers. We write the exact price down before any work starts, and that written price is the price. A free estimate includes an inspection of the frame, the hardware, and the sealing, plus a straight answer on whether repair or replacement is the smarter spend. Call (432) 278-2282 to schedule yours.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CWS Windows & Doors in Houston
That fog means the sealed glazing unit has lost its seal, and Houston’s morning humidity is condensing inside the airspace. It won’t dry out on its own, and no defogging treatment restores the insulating value. The fix is sash or unit replacement, depending on frame condition. Call (432) 278-2282 and we’ll confirm the diagnosis and give you a written price.
Usually no, not economically. Impact rating is a function of the entire assembly – glass, frame, anchoring – not a film you add to old glass. A 1995 CWS 3-lite roller will almost always need full replacement with a 6000 Series impact slider or equivalent to meet wind-borne debris code in Clear Lake. We’ll walk you through the options and the permit path without sugarcoating it.
Usually the frame is not warped. What we typically find on Heights bungalows is channel corrosion or paint buildup on the jamb, not structural frame failure. We clean and re-line the channel, replace the balances, and the sash moves again. Call (432) 278-2282 for a free look before you assume the window’s done.
Casement cranks in Houston need more attention than in drier climates. Humidity accelerates gear wear, so we recommend lubricating the operator assembly annually and checking for resistance before forcing the crank. If the gears strip or the torque bar snaps, we replace the operator rather than patching it.
Interior condensation on vinyl frames in Houston usually points to an air seal or humidity problem, not a window defect. We check the weatherstripping, the interior relative humidity, and the AC’s dehumidification performance before blaming the glass. If the sealed unit is intact, the fix is often air sealing around the frame rather than window replacement.
Service Areas Near Houston
We run CWS service calls across the Houston metro every week. League City, Channelview, Jersey Village, Atascocita, and Fresno are all within our regular route. For homeowners on the southeast side, see our CWS service in League City page; for the east side, CWS service in Channelview. For the full footprint, visit our Houston service area page.
Book Your CWS Service in Houston Today
Call (432) 278-2282 to schedule a free CWS estimate anywhere in Houston. A live person answers, day or night. We’ll inspect the unit, write the price down, and tell you exactly what the job needs – no pressure, no games.
Written by Elliot Vance, Owner at Meridian Windows and Doors Houston, serving Houston since 2009.
Six Reasons Homeowners Choose Meridian Windows and Doors Houston
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.