New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Houston pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Window Replacement: The Houston Owner’s Guide
If you own a CWS window in Houston and a sash, glass unit, or balance has failed, the replacement itself typically runs $220 – $480 installed depending on the part and the series. We stock CWS-compatible glass packs, balances, rollers, and hardware, and most single-part swaps are done in one visit. The way owners usually find us: a window suddenly won’t stay up, condensation fogs the glass from the inside, or a lock no longer catches because the frame has shifted.
Houston’s heat and humidity are hard on windows. We see CWS extruded aluminum frames that hold up well for a decade but fail at the seals and balances because the thermal cycling is relentless. The good news: you rarely need a whole new window. You need the right part, matched to the right series, installed by someone who knows CWS hardware.
Which CWS Models This Applies To
We handle CWS replacement parts across the residential single-hung, horizontal slider, and casement lines most common in Houston homes. The single-hung 4000 and 6000 series show up frequently in subdivisions built from the early 2000s through about 2018, and the 7200 impact line appears in coastal-belt homes and newer construction near Clear Lake and Friendswood. Each series uses different balance lengths and shoe profiles, so the part has to match, not just the rough opening.
Here’s the compatibility gotcha most owners don’t know: CWS changed balance shoe profiles between older and newer single-hung runs. A window from 2006 and a window from 2016 can look identical from the living room but take different balances because the shoe changed in the track. If you order the wrong one online, it binds or drops. We identify parts from the etched label on the corner of the frame, or by pulling the sash and measuring the balance length and stamp. For OEM CWS parts, we order direct from authorized distribution. For balances and rollers, we also install quality aftermarket equivalents that match the original spec and last as long in Houston conditions. When an OEM part is discontinued, aftermarket is the only honest path, and we tell you that before you pay anything.
Signs Your CWS Window Replacement Is Failing
- The sash won’t stay up or drops hard when released. This is a balance failure. The coil or block-and-tackle balance inside the jamb has worn out or snapped. On CWS single-hungs, the balance shoe loses tension after years of heat cycling, and the window becomes a two-handed job.
- Fog or moisture between the panes. The insulating glass unit (IGU) seal has failed. Houston’s humidity finishes the job once the seal starts to go. Clean the outside all day; the haze stays because it’s trapped between the panes.
- The lock won’t align or the window won’t seat closed. Usually a sign the sash has shifted in the frame or a roller has collapsed. On sliders, a worn roller drops the sash a few millimeters, and the lock misses its keeper. The window still looks fine from across the room, but it isn’t sealing.
- You can feel hot air or drafts around the closed sash. Weatherstripping dried out or the frame seal between the window and the wall has failed. On aluminum-frame CWS windows, the weep system can also clog, which holds water against the seal and accelerates the failure.
- The window is harder to open each month. Debris and oxidation build up in the track, and the rollers or balance carry more friction. Eventually something breaks. A window that fights you is telling you the hardware is near the end of its life.
Replacement Cost & What’s Included
Most single-part CWS window replacements in Houston run $220 – $480 installed. The range depends on the part:
- Balance replacement (single sash): $95 – $180 installed
- Roller replacement (slider, per panel): $80 – $160 installed
- Insulated glass unit replacement: $180 – $420 installed, depending on size and whether it’s impact-rated
- Lock and keeper replacement: $45 – $110 installed
- Weatherstripping and seal replacement: $60 – $150 installed
The price you get from Meridian Windows and Doors Houston is the price you pay. It goes on paper before any work starts and it does not move at the door. That includes the part, the labor, haul-off of the old part, and a written 365-Day Done Right Promise: if the replacement fails within a year, we come back at no charge. No labor exclusions, no fine print.
DIY or Call Us?
You can safely check two things before calling: the etched label on the window frame corner (that tells us the series and glass info) and whether the problem is in one sash or every sash. That’s where DIY should stop. Balances on CWS single-hungs are under tension, and releasing one without the right tool and technique can snap a finger or send a metal shoe into the room. Glass units are sealed and gassed; a botched reglaze on an impact-rated IGU voids the rating and still leaks. We carry the common CWS balances, rollers, and locks on the truck, so one visit usually finishes the job. Call (432) 278-2282 and we’ll tell you over the phone whether it’s a truck-stock part or a one-week order.
FAQs
A CWS window in Houston typically lasts 20 – 25 years before major components fail, but glass seals commonly fail in years 10 – 15 and balances often need replacement around year 12 – 18 because heat and humidity accelerate wear. Coastal exposure shortens both timelines. Call (432) 278-2282 if yours is showing signs, and we’ll give you an honest read on whether it’s a $200 part or a full replacement.
No, balances, rollers, locks, and sealed glass units are replaced, not repaired. These are wear parts with no serviceable interior. The value of a specialist is matching the correct replacement part the first time so the window operates like new. Call (432) 278-2282 with the label info from your frame and we’ll confirm the part before we schedule.
Most single-part swaps take 45 – 90 minutes on site for a balance, roller, lock, or glass pack replacement. If we need to order a specific OEM part, it typically arrives within 5 – 7 business days, and installation is then one visit.
We stock common CWS balances, rollers, locks, and weatherstripping on our trucks, along with select glass packs for the 4000 and 6000 series lines. Less common series or impact-rated parts typically require an order. We also stock parts for PGT, CGI, and ES Windows, so if you have mixed brands in the house, one call covers all of it. Call (432) 278-2282 and we’ll confirm stock before you book.
Written by Elliot Vance, Owner & Lead Installer, Meridian Windows and Doors Houston at Meridian Windows and Doors Houston, serving Houston and nearby areas.
Six Reasons Homeowners Choose Meridian Windows and Doors Houston
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.