New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Houston pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Door Installation: The Houston Owner’s Guide
If you own a CWS door in Houston and the installation is failing, our crews replace CWS door frames, thresholds, hinges, and weatherstripping for $425 to $1,850 installed, depending on the door type and what failed. Most Houston homeowners call us when the door binds at the top corner, the sill leaks during a downpour, or the panel has dropped enough to drag on the threshold. CWS makes a well-engineered product, but Houston’s heat and humidity push every component harder than most climates do.
We stock common CWS-compatible hardware on our trucks and can usually have a full installation or component replacement scheduled within days, not weeks. You call, we look, we hand you a written price before any work starts. That part never changes.
Which CWS Models This Applies To
CWS builds several lines of aluminum and vinyl doors common in Houston homes. We regularly work on their 8200 and 8400 series sliding glass doors, the 6800 series French doors, and their standard hinged entry systems. CWS uses a stamp on the door’s corner or edge to identify the product line: look for a small embossed code near the top track or on the hinge-side jamb. If the stamp has worn away, measure the glass thickness and the frame width. CWS aluminum frames run 2-5/8 inches to 5-1/4 inches wide depending on the series, and that number determines what hardware fits.
The compatibility gotcha most people miss: CWS changed their roller housing dimensions in 2019. Pre-2019 sliding doors use a 7/16-inch axle roller; 2019 and later use a 1/2-inch axle. Buy the wrong size and the door won’t seat in the track properly. We match the original part when it’s still available from CWS, and we carry quality aftermarket equivalents for common sizes when OEM is discontinued or backordered. Both options get written pricing before work begins.
We also maintain parts inventory for PGT, CGI, and ES Windows systems for multi-brand homes.
Signs Your CWS Door Installation Is Failing
- The door drags on the threshold or binds at the top corner. This means the frame has shifted or the hinges have worn. Houston’s clay soil expands and contracts with moisture, and older slabs settle unevenly enough to pull a frame out of square.
- You can see daylight through the seam when the door is closed. Weatherstripping compression has failed or the frame plumb is off. Either way, your air conditioning is leaking into the yard all summer.
- The sill is soft or shows water staining after rain. A failed threshold seal lets moisture wick up into the subfloor. In Houston’s rainy season, this compounds fast once it starts.
- The sliding panel sticks mid-track or feels rough when rolling. Roller bearings wear out or the track accumulates grit from the driveway. Forcing a rough slider eventually bends the roller housing.
- The door no longer latches without lifting the handle. Strike plate alignment is off because the panel has shifted. This is a security weak point and will only get worse as the door settles.
Replacement Cost & What’s Included
For a CWS door component replacement in Houston, most jobs run between $425 and $1,850 installed. A hinge or weatherstripping replacement typically sits at the lower end: $425 to $750. Swapping a sliding door’s rollers and track runs $675 to $1,100. Full frame resets or threshold replacement with concrete work land between $1,200 and $1,850, depending on the frame condition and access.
| Job | Typical Installed Price |
|---|---|
| Weatherstripping or threshold seal replacement | $425 to $750 |
| Sliding door roller and track replacement | $675 to $1,100 |
| Hinge replacement or realignment | $450 to $800 |
| Full frame reset or threshold replacement | $1,200 to $1,850 |
Every quote includes the part, labor, disposal of the old component, and a written 365-Day Done Right Promise. If anything about the installation fails within that year, we return and fix it at no charge. No labor exclusion fine print. That’s the guarantee Elliot Vance signs on every job.
DIY or Call Us?
You can safely check a few things on your own: look for loose hinge screws, visible gaps in the weatherstripping, or debris packed into a sliding door track. Basic cleaning and tightening are fine to do yourself. What you should not attempt is removing a CWS sliding panel or resetting a frame. A full glass panel weighs 80 to 150 pounds depending on the series, and forcing a misaligned door out of its track is how glass gets shattered and fingers get crushed. Threshold replacement often requires cutting into the existing seal and leveling the subfloor: the kind of thing that goes wrong quickly without the right flashing and sealant.
If the problem is beyond a screwdriver and some cleaner, call (432) 278-2282. We’ll inspect it, give you a written price, and let that number do the convincing.
FAQs
In Houston’s climate, a properly installed CWS door typically lasts 15 to 20 years before the rollers, weatherstripping, or threshold need replacement. Components like seals and hinges wear out sooner: expect 5 to 10 years on weatherstripping, faster on west-facing doors that take direct afternoon sun. Call (432) 278-2282 and we’ll inspect your specific installation at no charge.
Yes. In most cases, component replacement handles the problem without a full installment reinstalled. We replace rollers, hinges, thresholds, weatherstripping, and locks as standalone jobs when the frame is still square and sound. We’ll tell you honestly if the frame has shifted past the point of cost-effective repair.
Most CWS roller, hinge, or weatherstripping replacements take 2 to 4 hours on site. A full threshold replacement or frame reset can take a full day, including concrete work and cure time on the sealant. We give you a time estimate with the written price, so you know both before we start.
We keep common CWS roller sizes, hinge sets, and weatherstripping profiles on our trucks for immediate use. Uncommon or series-specific parts may need to be ordered from CWS or sourced as a quality equivalent, and we’ll tell you which path we’re taking when we hand you the quote.
Measure twice, seal it right, and the window does the rest of the talking. Call (432) 278-2282 for a free estimate on your CWS door installation in Houston.
Written by Elliot Vance, Owner & Lead Installer, Meridian Windows and Doors Houston at Meridian Windows and Doors Houston, serving Houston and nearby areas.
Six Reasons Homeowners Choose Meridian Windows and Doors Houston
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.