VLX 100 Arched / Custom Door

VLX 100 Arched / Custom Door in Houston, TX | Meridian Windows and Doors Houston

An arched entry door changes the entire feel of a home. The VLX 100 Arched / Custom Door from ViewLux does it with CNC-bent aluminum, which means the curve is exact, not forced. Meridian Windows and Doors Houston is an authorized ViewLux installation partner, so Houston homeowners get the product and the installation expertise from one accountable team. Whether you’re building in River Oaks or replacing a dated front door in The Heights, this is a door that makes the entryway the focal point of the house. Call (432) 278-2282 to talk about your project.

Call (432) 278-2282

Product Overview – VLX 100 Arched / Custom Door

The VLX 100 Arched / Custom Door exists for one reason: most door manufacturers avoid curved openings because they’re hard to engineer correctly. ViewLux leans into it. Each door is fabricated to order, so you’re not wrestling a stock unit into a rounded rough opening. The frame is bent on CNC equipment, which produces a clean radius with no crimping, no stress marks, and no visual distortion. The result is a curved architectural statement that reads as deliberate, not compromised.

Architecturally, the arched profile fits specific Houston home styles beautifully. Spanish Colonial and Mediterranean homes in places like Braeswood Place and Timbergrove almost demand a curved entry to carry the facade. Mid-century modern homes in Glenbrook Valley get an unexpected but elegant lift from a cleanly radiused aluminum door. Even new construction in master-planned communities like Bridgeland or Towne Lake benefits when the builder wants an entry that doesn’t look like every other door on the block.

Material choice matters in Houston’s climate, and aluminum was the right call here. It does not warp in humidity, it does not swell after hurricane-season rain, and it will not rot like wood can after a decade of Gulf Coast moisture. With thermal break technology built into the profile, it also does not conduct heat the way older aluminum doors did. That combination of dimensional stability and energy performance is why we recommend the VLX 100 for Houston entries more than almost any other product in our catalog.

Meridian Windows and Doors Houston carries this line because we have installed enough doors in Houston to know what holds up. We are an authorized partner, which means factory training, direct technical support, and warranty protection that stays intact through installation by us, not a third party.

Technical Specifications

Here are the numbers that matter when comparing this door against a standard residential entry unit.

• Frame wall thickness: 0.098 inches. This is a heavier extrusion than most off-the-shelf aluminum doors, which gives the frame torsional rigidity and keeps the radius stable over time.
• Profile width: 2.56 inches. A wider profile gives you more glass surface options and a more substantial visual presence at the entry.
• Maximum span: Fabricated to order. There is no stock size limit you need to design around. If your opening is 8 feet or 10 feet wide or an unusual radius, we measure, order, and install to fit.
• Glass options: Clear, Frosted, Obscure, Low-E, Tempered, Laminated. Each can be combined depending on your privacy and energy goals.
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood. Powder-coated and anodized finishes resist salt air and UV fading.
• Performance standards: NFRC-rated thermal performance, AAMA 2400/2410 installation compliance, AAMA 812 perimeter sealant.

Performance Features

Thermal Efficiency. The VLX 100 profile includes a thermal break that separates the interior and exterior aluminum faces. In Houston, that means the inside of the frame does not become a heat sink in August or condensate when the AC runs hard. NFRC ratings confirm measurable energy performance, not just marketing claims.

Acoustic Performance. A solid arched entry with quality weatherstripping noticeably reduces street noise. That matters on busy Houston corridors: Westheimer, Washington Avenue, Kirby Drive. Laminated glass upgrades the sound reduction further, which is a common request from homeowners near freeways or school zones.

Airtightness & Weather Seal. Sealing quality determines whether a door leaks air around the perimeter. Every VLX 100 we install gets AAMA 812 low-expansion foam sealant on all perimeter joints. That closes the gaps that cause drafts and dust intrusion, particularly during Houston’s dry, dusty stretches in late summer.

Waterproofing. Houston gets about 50 inches of rain a year, often in short violent bursts. The combination of the thermal break design, full perimeter sealing, and proper sill installation keeps water on the exterior side. We water-test every installation before we call the job done.

Wind Resistance. Homes in Houston and the surrounding Gulf Coast region deal with tropical storm force winds almost every season. The rigid 0.098-inch frame and laminated glass option keep the door rated for local wind load requirements. If your property is in a coastal exposure zone, we can specify the right glass package for it.

Security & Hardware. A heavy-duty aluminum frame gives the locking hardware something solid to anchor into. The wide profile supports multi-point locks, which spread force across the door rather than relying on a single latch point. Laminated glass also delays forced entry compared to standard annealed glass.

Color & Glass Options

The VLX 100 comes in six finishes, and the right one depends on the architectural language of the house.

Premium Black is the choice for modern and transitional Houston homes. It reads sharply against white stucco or brick and frames the entry with clear intent. Pure White suits traditional elevations and works well in neighborhoods like West University Place where lighter palettes dominate. Anodized Silver has a machined, industrial character that fits contemporary townhomes inside the Loop. Bronze is the bridge finish: warm enough for traditional brick, dark enough for modern. Champagne is subtle and uncommon, a light warm metallic that gives a quieter luxury than polished bright finishes. Teak Wood is a wood-grain powder coat that delivers the warmth of timber without the rot and repainting cycle that real wood demands in Houston humidity.

On the glass side, Clear maximizes light and visibility. Frosted and Obscure give privacy for entries that face a street or a close neighbor while still passing daylight. Low-E is the energy upgrade most Houston buyers should seriously consider for west-facing entries. Tempered glass is an important safety upgrade for full-height glazing. Laminated glass adds hurricane debris resistance and acoustic dampening. Combinations are available, and we will walk you through what makes sense for your specific exposure during the quote process.

Installation by Meridian Windows and Doors Houston in Houston

An arched door lives or dies at installation. A factory-perfect radius that gets forced, shimmed poorly, or sealed incorrectly will bind, leak, or void its warranty. We install every VLX 100 unit to AAMA 2400/2410 standards, which are the accepted installation guidelines for fenestration products in residential and light commercial construction.

The process starts before the door arrives. We measure the rough opening in three places per side, check the floor for level, and verify that the existing structure can handle the door’s weight. If the opening is out of square, we correct it now, not after the door is hanging.

On install day, the crew sets the frame level, plumb, and square, using the factory anchor points rather than drilling arbitrary holes through the extrusion. The perimeter gets AAMA 812 low-expansion foam sealant, which seals without bowing the frame. Head flashing and sill pan details follow manufacturer and AAMA recommendations. Then we hang the door, set the sweep and weatherstripping, and adjust until the reveal is even and the door closes with the right resistance.

Houston-specific realities shape how we install here. Afternoon heat can affect sealant work, so we schedule sealant application for conditions when the product cures correctly. We also check for drainage plane continuity, because in a climate where wind-driven rain is routine, water that gets behind siding needs a path out, not down into the subfloor.

The job is not done until we water-test the installation and walk you through the door’s operation, hardware adjustment, and finish care. That level of care is why an authorized partner installation matters. Improper installation voids the manufacturer warranty, and a warranty claim on an arched door installed by a cut-rate crew is a fight nobody wants to have.

Frequently Asked Questions – VLX 100 Arched / Custom Door

What is the lead time for the VLX 100 Arched / Custom Door?
Expect 6 to 10 weeks from final measurements to delivery at our Houston warehouse, because every unit is fabricated to order. Custom finishes and laminated glass can extend that slightly. Call (432) 278-2282 for a current production timeline based on your exact configuration.

Does the VLX 100 qualify for energy tax credits?
The door’s NFRC-rated thermal performance may qualify for federal energy efficiency tax credits, depending on the glass package selected and the current program year’s requirements. Meridian Windows and Doors Houston can provide the performance documentation your tax preparer needs. Call (432) 278-2282 and we will review the applicable credits with you.

What warranty comes with the Arched / Custom Door?
ViewLux provides a manufacturer warranty on the frame, finish, and glass, and installation by Meridian Windows and Doors Houston keeps that warranty intact. Structural and finish coverage terms vary by series and finish selection, so ask us for the specific warranty document before you order.

Can I customize the size?
Yes. The VLX 100 is fabricated to order, so width, height, and radius are built to your opening rather than forcing your opening to match a stock door. We measure on site in Houston, verify the dimensions against the structural drawings, and order from the factory with those exact numbers.

How do I maintain aluminum frames?
Aluminum frames need a rinse with mild soap and water two or three times a year, especially after pollen season in Houston. Avoid abrasive cleaners. Check the weatherstripping annually and lubricate hinges and lock points with a dry lubricant. Beyond that, the finish does the work for you.

Get a Quote – VLX 100 Arched / Custom Door in Houston

If you are planning a new build with an arched entry or replacing a door that does not perform, Meridian Windows and Doors Houston will measure, specify, and price your VLX 100 project accurately. We work with Houston homeowners, builders, and architects across the metro area. Call (432) 278-2282 to schedule a free on-site measurement and get a written, line-item quote.

Written by the team at Meridian Windows and Doors Houston, authorized ViewLux installation partner serving Houston, TX.